Features
In consideration of the spread of the bristle material, the metal fittings are designed to prevent breakage and prevent damage to the base of the wire.
Produced with an optimal balance of hair material density, wave shape, and trim.
Since it is manufactured with high balance standards, there is less vibration to the arm and reduces work fatigue.

Use
Removal of rust and dirt from various metal products
Cleaning before and after welding
Polishing tanks and drums for shipbuilding, bridges, etc.
Removal of paint

Specification
Outer diameter (mm): 50
Wire diameter (mm): 0.3
Bristle material: BRH-0.3 Galvanized stranded wire
Thread diameter: M10 (P1.5)
Maximum operating speed (rpm): 13000

Specification2
Outer diameter 50 (metal diameter 48) x thread diameter M10 female thread (P = 1.5) Hair length 20

Material/Finish
BRH-0.3 Galvanized stranded wire (1.2)

Set contents/accessories

caution
Please use a brush that matches the screw diameter of each power tool.
Before use, be sure to check that the screw is screwed in completely or the nut is tightened completely.
Please never use it attached to a magnet/magic.