Features
Constructed of highly corrosion resistant SUS316.
Can be used in a wide temperature range from low to high temperatures.
You can select a dedicated fitting that is optimally designed for each tube material.
There is no possibility of turning the tube too much due to over-tightening of the cap nut.
There is no problem with the connection until the tube ruptures.
No need to manage the tightening torque of cap nuts.

Use
For corrosive fluid piping
For hydraulic piping
For rust-proof piping

Specification
Applicable tube outer diameter D (mm): 4
Hexagonal width across flats (mm): 14
Connection diameter: Rc1/8
Operating temperature range (): -65 to 180 (air), 0 to 180 (water), – 65 to 180 (corrosive fluid)
Fluid used: Air, water, corrosive fluid
Applicable fitting size D (mm): 4
Hexagonal width across flats (mm) Body: 14
Applicable tube inner diameter (mm): 2.5
Hexagonal width across flats (mm) Mounting nut: 10

Specification2
Fluid temperature (): -65 to 180 (air), 0 to 180 (water), -65 to 180 (corrosive fluid)
Maximum operating pressure: Conforms to tube maximum operating pressure
Maximum vacuum pressure used : 0.014kPa or more Compatible tubes: Multilayer tubes AP1, AP4, fluorine tubes TA, TF, nylon tubes AS1, AS4 (air, water only)

Material/Finish
Stainless steel (SUS316)

Set contents/accessories

caution
If the operating temperature range of the tube is within the operating temperature range of the fitting, give priority to the operating temperature range of the tube.