Features
For general metals.
It is elastic and can be used as a disc paper (used on a flat surface) or a flap wheel (used on a side).
There is a slight gap between the polishing cloths, so there is less clogging and you can use it until the end.
Perfectly fits curved surfaces.
Direct screw-in type.
Each piece is hand-planted and caulked professional abrasive material.
The 10mm thick type is ideal for polishing isthmuses such as grooves and corners.

Use
Paint removal and polishing before plating.
Ideal for polishing stainless steel, iron, alloy, wood, plastic, etc.

Specification
Particle size (#): 400
Outer diameter (mm): 100
Abrasive material: Alundum
Thread diameter (mm): M10
Maximum operating speed (rpm): 7000
Number of blades (sheets): 250
Thickness (mm): 10

Specification2
Maximum circumferential speed: 36.6m/s (2198m/min)

Material/Finish
Alumina abrasive material

Set contents/accessories
With 6mm shaft adapter (1 piece per box)

caution
Always wear protective equipment such as a hard hat and safety glasses when working.