The SWP 9030H Stealth Digi-Cut 42 PFC Multi-Voltage 110V/240V Plasma Cutting Machine is perfect for advanced metal fabrication. With generator friendly contact arc striking and a complete air regulator, you can make clean cuts up to 15mm on any metal. Plus, Plasma torch, 3m earth return lead and 3m gas hose are included.

Key Features of the SWP 9030H Stealth Digi-Cut 42 PFC Multi-Voltage 110V/240V Plasma Cutting Machine:

• Generator friendly
• Contact arc striking
• Complete with air regulator
• Clean cuts to 15mm
• Carry case supplied
• PC7100H plasma torch included
• BA55/200BS1 or BA3/200BS3 Recommended compressor at 100% Duty Cycle
• Power Factor Correction: 0.99

Technical Specifications of the SWP 9030H Stealth Digi-Cut 42 PFC Multi-Voltage 110V/240V Plasma Cutting Machine:

Input power voltage (V): 110V/230V10%

Frequency (Hz): 50/60

Effective input current (A): 110V 20.4 | 230V 16

Maximum (kVA): 110V 3.8 | 230V 5.2

Current adjustment range (A): 110V 20-30 | 230V 20-40

Maximum no-load voltage (V): 320

Duty cycle (A) (40C 10 min) 110V: 35%@30 | 60%@22 | 100%@20

Duty cycle (A) (40C 10 min) 230V: 50%@40 | 60%@36 | 100%@30

Severance cut for carbon steel (mm): 110V 20 | 230V 25

Production cut for carbon steel (mm): 110V 10 | 230V 15

Production cut for stainless steel (mm): 110V 10 | 230V 15

Production cut for aluminium (mm): 110V 8 | 230V 12

Production cut for copper (mm): 110V 6 | 230V 10

Air operating pressure (psi): 50-90 (3.5-6bar)

Air operating flow (l/min): 160 (5.65 cfm)

Protection class: Ip23

Insulation class: H

Cooling: Air

Overall dimensions (mm): 480 x 148 x 292

Weight (kg): 8

Included with the SWP 9030H Stealth Digi-Cut 42 PFC Multi-Voltage 110V/240V Plasma Cutting Machine:

3m earth return lead, 3m gas hose

PC7100H plasma torch

Buy SWP 9030H Stealth Digi-Cut 42 PFC Multi-Voltage 110V/240V Plasma Cutting Machine online now from DW Toolshop, one of the UK and Irelands largest tool shops